Extendable acacia dining table 1.5" natural bleached edge

BLEACHED ACACIA

Specific treatment of the wood with a varnish to give an appearance in very light tones to the table top.

Acacia wood and metal
2 boxes
Weight: 63" = 110Kg; 72" = 135Kg
Assembly required
Made in India

No part will be exactly identical to the presentation photos because each of our furniture is unique.

Our products are handcrafted from natural raw materials. The colors and structures of the woods used may therefore vary from one piece of furniture to another and may vary from the visuals on our website or from the product you have seen in demonstration in one of our stores.

MAINTAINS

CONTROL THE HUMIDITY!

The movement of wood is most often associated with fluctuations in humidity. Therefore, try to keep the relative humidity in the area of ​​your wood furniture between 30% and 40%, and avoid any sudden temperature difference.

Exposure, especially sudden wood moisture can cause damage to your furniture such as cracks or twists. Thus, it is best not to expose furniture near an air duct so that it does not suffer from changes in air temperature. In winter, the climate is all the harsher and dry, so you have to be particularly careful during this difficult time.

Protection against chemicals, sun and other sources of heat:

Avoid exposing your furniture directly to the sun, the contact of these with the uv ray may discolor or even crack the wood. Over the seasons, all furniture undergoes changes, due to changes in temperature and ambient humidity, resulting in slight cracks. All these differences are not defects but on the contrary affirm the particularity of your wooden furniture.

Be careful not to place hot objects on the furniture, the heat can alter the composition of the furniture and leave traces. This problem can be circumvented by the installation of resistant trivets. Be careful, if you put decorative objects, place stamps under them beforehand.

NORMAL CHARACTERISTICS OF SOLID WOOD FURNITURE

Like any living material, different shades can occur through the finish. Even if the finish used is similar, a variation in color, shade, aspect or tint between several pieces of furniture but also on the same piece of furniture may occur.

As well as knots, woodworking products (wood putty, epoxy, etc.) or assembly lines can be visible through the painted surface and for some pieces of furniture this can be a deliberately sought-after aspect.

Ready-to-assemble products should be handled with care and caution. Inspect each part and hardware BEFORE assembly. Parts and/or hardware claims must be made BEFORE assembly. Damage resulting from assembly errors and/or mishandling of parts, including scratches, is not covered by this warranty.